1. Home
  2. Products
  3. Non-Magnetic Tungsten Alloy

Non-Magnetic Tungsten Alloy

Tungsten Heavy Alloy, Non Magnetic Bar, Tungsten Carbide Wear Parts, Non Magnetic Tungsten Carbide Plates

Non-magnetic tungsten alloy is made by sintering tungsten carbide powder and nickel powder. With no magnetism, non-magnetic tungsten alloy is commonly used for making wear parts in magnetic equipment or environment.

Features
Non-magnetic tungsten alloy shows: high hardness, good wear resistance, good polishability, little thermal expansion, high thermal conductivity, and good corrosion resistance

Application
Typical applications of non-magnetic tungsten alloy are instrument, water meter shaft, mold, shaft for pump, wear parts, punch, etc.

Physical and Mechanical Properties
Grade Tensile strength (Mpa) Density (g/cm³) Hardness (HRA)
ZN11 3000 * 14.3 88.5
ZN14 3500 * 14.1 86.5
Non-Magnetic Carbide Rods
Dimension (mm) Diameter tolerance (mm) Length tolerance (mm)
Φ1.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ1.7 ×300/330 +0.2/+0.5 +0/+0.5
Φ2.3 ×300/330 +0.2/+0.5 +0/+0.5
Φ1.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ2.3 ×300/330 +0.2/+0.5 +0/+0.5
Φ2.8 ×300/330 +0.2/+0.5 +0/+0.5
Φ3.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ3.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ3.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ4.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ4.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ5.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ5.3 ×300/330 +0.2/+0.5 +0/+0.5
Φ4.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ5.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ6.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ6.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ7.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ7.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ8.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ8.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ9.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ9.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ10.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ10.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ11.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ11.3 ×300/330 +0.2/+0.5 +0/+0.5
Φ11.5 ×300/330 +0.2/+0.5 +0/+0.5
Φ12.0 ×300/330 +0.2/+0.5 +0/+0.5
Φ12.5 ×300/330 +0.2/+0.5 +0/+0.5
For details please download the PDF file: